In applications such as outdoor instruments, portable testing devices, and industrial control terminals, displays must not only provide stable information display capability but also withstand complex ambient lighting, wide temperature variations, and the device's own power consumption constraints. Especially in outdoor environments with direct sunlight, ordinary transmissive LCDs mainly rely on internal backlight for illumination, and the screen surface may also produce obvious specular reflection, affecting users' ability to read information.
For battery-powered portable electronic devices, wireless monitoring terminals, and long-running industrial instruments, the power consumption of the display module directly affects the overall energy efficiency and battery life of the equipment. How to reduce backlight dependence and lower the current consumption of the display section while ensuring information readability is a direction worth attention in low-power industrial display design.
In response to these application requirements, HOTDISPLAY introduces the HTG12864-101 128x64 FSTN Transflective LCD Display. This product adopts FSTN transflective positive display technology combined with an anti-glare (AG) surface film design, which can utilize ambient light to assist display and reduce obvious specular reflection interference in strong-light environments. Meanwhile, the product supports a wide operating temperature range of −30℃ to +80℃, and in the backlight-off working state, the module current is only 50μA, fully demonstrating its advantages in low-power applications. With an I2C communication interface, this 128x64 FSTN Transflective LCD Display from a professional China LCD manufacturer provides a display solution that balances outdoor visibility, environmental adaptability, and energy efficiency for outdoor instruments, industrial control equipment, and battery-powered embedded terminals.
In the actual use of outdoor electronic devices, changing ambient light is an important factor affecting LCD display performance. Ordinary transmissive LCDs mainly rely on an internal LED backlight for illumination. When a device is in direct sunlight or a high-brightness environment, external light may affect the actual contrast of the screen, and users sometimes need to adjust the device angle or even shield the screen with their hands to read information more clearly.
The HTG12864-101 adopts an FSTN Transflective Positive display mode. Through its transflective optical structure, the 128x64 FSTN Transflective LCD Display can combine ambient light with the internal backlight for display. In bright outdoor conditions, the screen can use external ambient light to assist display and reduce dependence on the LED backlight; in low-light environments or at night, the backlight provides the necessary illumination support.
This display approach not only improves the screen's adaptability to different lighting environments, but also offers more flexible energy management for low-power devices. In usage scenarios with sufficient ambient light where the backlight does not need to be turned on, the device can use natural light to complete information display, reducing the extra current consumption caused by the backlight system. As a china lcd manufacturer, we design solutions that address these practical power and visibility challenges.
For battery-powered devices that need to operate for long periods, the combination of transflective technology and low-power drive design can help reduce the energy burden of the display system. Working with a china lcd manufacturer that understands these requirements allows device makers to achieve more efficient and reliable outdoor display performance.
✅ Ambient Light-Assisted Display: Leverages external ambient light to improve the readability of information in bright environments.
✅ Reduced Reliance on Backlighting: In well-lit conditions, the need for backlighting is minimized, which helps lower the overall power consumption of the device.
✅ Energy Conservation: By reducing unnecessary backlight usage, it provides greater flexibility for power management in low-power electronic devices.
✅ Adaptability to Various Lighting Conditions: When combined with backlighting, it ensures reliable display performance even in low-light environments.
✅ Ideal for Outdoor Equipment: Offers a more versatile display solution for outdoor instrumentation, portable testing terminals, and industrial equipment.
Compared to traditional transmissive LCDs that rely solely on backlighting, the FSTN transflective structure makes more effective use of ambient light, achieving a superior balance between outdoor visibility and energy efficiency.

Beyond the display technology itself, the optical treatment of the screen surface also affects the outdoor viewing experience.
In environments with direct sunlight or strong ambient light sources, ordinary smooth glass or transparent panels are prone to obvious specular reflection. When external light reflects directly into the user's line of sight, even if the LCD itself displays normally, the reflected light can interfere and reduce information legibility.
The HTG12864-101 adopts an Anti-Glare (AG) surface film on the display panel, improving reflection performance under strong light through surface optical treatment.
AG anti-glare treatment diffuses incident light to a certain extent, reducing concentrated and obvious specular reflection, so users get a more comfortable visual experience at different viewing angles.
For the 128x64 FSTN Transflective LCD Display, the AG anti-glare film works well together with the transflective display structure: the former focuses on improving strong-light reflection on the screen surface, while the latter uses ambient light to assist display, jointly enhancing the product's usability in outdoor high-brightness environments.
From a low-power application perspective, a good outdoor display experience also helps reduce the need for users to frequently adjust display settings or turn on the backlight due to ambient light interference, allowing devices to choose backlight operating modes more flexibly. As a china lcd manufaturer, HTG provides reliable display solutions for industrial applications.
✔ Reduces prominent specular reflections caused by sunlight or other strong external light sources on the screen surface.
✔ Minimizes visual interference from reflected light, ensuring clearer visibility of displayed information.
✔ Enhances the viewing experience under various outdoor lighting conditions.
✔ Improves the ease of reading information on instruments, gauges, and portable devices when used in complex environments.

In industrial and outdoor applications, equipment may need to operate in cold winters, hot summers, and environments with large day-night temperature swings. The operating temperature range of ordinary consumer-grade display modules is relatively limited, making it difficult to meet the environmental requirements of some industrial equipment for long-term operation. The HTG12864-101 supports an operating temperature range of −30℃ to +80℃, capable of adapting to significant ambient temperature changes and providing more reliable display support for outdoor and industrial equipment.
In low-temperature environments, the response characteristics of liquid crystal materials may change, so display modules need to be designed for low-temperature conditions to meet the corresponding display requirements. In high-temperature environments, the liquid crystal materials and driver circuits inside the display module also need to have corresponding temperature adaptability to ensure that the equipment can operate normally within the specified operating temperature range.
The 128x64 FSTN Transflective LCD Display extends the operating temperature range to −30℃ to +80℃ through its wide-temperature design, while also supporting a storage temperature of −40℃ to +85℃, providing more options for equipment integration in different climate regions and complex industrial environments.
For outdoor wireless monitoring terminals, battery-powered testing instruments, and other devices requiring long-term deployment, wide-temperature operating capability and low-power design are equally important. The display module not only needs to work normally under different temperature conditions but also needs to minimize energy consumption to meet the requirements of long-term equipment operation. As a professional china lcd manufaturer, we provide reliable wide-temperature display solutions for industrial applications.
Product temperature parameters:
Operating temperature: −30°C to +80°C
Storage temperature: −40°C to +85°C
This temperature range enables the product to be used in outdoor monitoring equipment, industrial instrumentation, portable testing tools, and other electronic devices that require the ability to operate across a wide temperature range.

For portable electronic devices, wireless monitoring terminals, and battery-powered industrial instruments, power consumption control is always a critical part of product design. Although the display module is only one component of the overall system, the power consumption of its driver circuit and backlight system directly affects the device's energy efficiency. This is particularly meaningful for devices that require long standby times, intermittent data refresh, or continuous monitoring.
A standout feature of the HTG12864-101 is its ultra-low power performance: with the backlight off, the module draws only 50μA. This 50μA low-current performance makes this 128x64 FSTN Transflective LCD Display especially suitable for power-sensitive embedded electronic devices. In operating modes that do not require backlight illumination, the display module can maintain display functionality at low current, reducing the continuous battery drain caused by the display section.
For devices requiring long standby times, a low-power display module helps reduce the energy burden during idle operation; for devices that intermittently collect and update data, the module's operating state can be further optimized in conjunction with the host system's power management strategy.
In addition, the product adopts an FSTN transflective display structure, which can use ambient light to assist display under sufficient lighting conditions, reducing the need to turn on the backlight. Compared with display solutions that always rely on backlight illumination, this approach provides more energy-saving headroom for low-power devices. As a china lcd manufaturer, we support customized display solutions for industrial applications.
● Ultra-low 50μA current: The module consumes only 50μA of current when the backlight is turned off.
● Reduced standby power consumption: Lowers the current draw of the display component during operation without a backlight.
● Optimized battery life: Eases the energy burden on the display system, extending the runtime for battery-powered devices.
● Reduced reliance on backlighting: Leverages ambient light to assist with visibility, allowing for less frequent use of the backlight in suitable environments.
● Ideal for long-term operation: Well-suited for low-power instrumentation, wireless monitoring equipment, and portable electronic devices.
● Flexible power management: Enables intelligent control of the backlight—turning it on or off based on ambient brightness and the device’s operational state.
Particularly in battery-powered portable testing equipment, field monitoring terminals, and wireless sensing devices, low-power display solutions help developers strike a better balance between display quality and energy efficiency.
Note regarding power consumption specifications: The 50μA figure refers to the module's current draw when the backlight is turned off. The product specifications list the backlight parameters as Vf=3.1V and If=45mA; therefore, the total current will increase accordingly when the backlight is enabled. The actual power consumption of the complete device must be evaluated by accounting for the duration the backlight is active, the power consumption of the main control system, and the specific operating mode. It should not be assumed that the entire module consumes only 50μA when the backlight is on.

The HTG12864-101 adopts a 128×64 graphic dot-matrix display structure, providing a total of 8,192 independently controllable display pixels, and can implement different information layouts according to the host control program.
Compared with character-type LCDs that can only display fixed characters or numbers, graphic dot-matrix LCDs offer more flexible display content design capabilities. Developers can customize characters, numbers, icons, menus, and simple graphic symbols according to device functional requirements.
For example, in industrial instruments, they can display measurement data, operating status, and alarm information; in portable devices, they can show battery level, operating mode, and operation prompts; and in outdoor monitoring equipment, they can present sensor data and device operating parameters.
For low-power devices, the 128×64 graphic dot-matrix structure also offers good practical value. Devices can display only the necessary measurement data, status icons, and prompt information according to actual needs, without adopting a complex color display system, helping to control the overall design complexity and energy requirements of the display system. For industrial applications, the 128x64 FSTN Transflective LCD Display is a suitable choice, and as a china lcd manufaturer, we support custom solutions.
● Supports the display of digits, English characters, and custom characters.
● Supports simple icons, status indicators, and graphical symbols.
● Allows for the customization of menus and information layouts via software programming.
● Suitable for displaying measurement data, device parameters, and alarm notifications.
● Ideal for low-power information display and embedded human-machine interface (HMI) applications.
The 128×64 FSTN transflective LCD screen strikes an optimal balance between information display capacity, control flexibility, and power consumption, making it well-suited for electronic devices that do not require complex color graphics but do need to display basic information clearly.

During embedded device development, the display module's interface type directly affects the GPIO resource allocation of the main control chip and the overall hardware design.
The HTG12864-101 uses the UC1601S LCD driver IC and supports an I2C communication interface, exchanging data with the host MCU through two main communication signal lines, SDA and SCK.
Compared with parallel communication, which requires more signal pins, the I2C interface reduces the number of communication lines needed between the display module and the main controller, helping to simplify PCB routing and preserve more GPIO resources for other peripherals.
For embedded systems that must simultaneously connect temperature sensors, buttons, battery monitoring circuits, and other peripheral modules, this interface approach offers strong integration convenience.
Combined with a 50μA backlight-off current, the HTG12864-101 provides a more flexible display option for low-power embedded control systems. Developers can plan power management schemes reasonably according to the device's operating mode, display update frequency, and backlight usage requirements. As a china lcd manufaturer, we also offer the 128x64 FSTN Transflective LCD Display for industrial applications.
● Driver IC: UC1601S
● Communication Interface: I2C
● Communication Signals: SDA, SCK
● Driving Method: 1/64 duty cycle, 1/9 bias
● Logic Supply Voltage: 3.0V
Using the I2C interface, developers can integrate the display module into various MCU-based control systems according to specific product requirements—making it suitable for industrial control boards, portable instruments, and low-power embedded devices.

In addition to display performance and power consumption, the physical dimensions of a product are a critical factor to consider during the device development process.
The HTG12864-101 utilizes a COG (Chip-on-Glass) architecture, with the driver chip integrated directly onto the glass substrate. This design reduces the space required for the peripheral structures typically found in conventional display modules, offering greater flexibility for integration into compact electronic devices.
The product measures 48.0 mmx36.0 mmx3.8 mm, featuring a highly compact form factor.
Main dimensions and structure
ITEM | parameter | Unit |
Name | HTG12864-101-3SG-06C10-V05 | |
Number of dots | 128x64 | dots |
Module size | 48.0x36.0x3.8 | mm |
VA size | 44.0x25.0 | mm |
AA size | 39.66x19.82 | mm |
Pixel pitch | 0.31x0.31 | mm |
IC | UC1601S | |
Power supply voltage | 3.3V | V |
Backlight | Green | |
Display mode | FSTN+ | |
Drive mode (Duty) | 1/64 duty cycle | |
Type | COG LCD | |
Features | Transflective |
Incorporating FSTN transflective display technology, an anti-glare overlay, an ultra-wide operating temperature range, and a low-power design (50μA), the HTG12864-101 is well-suited for a variety of electronic devices that demand outdoor visibility, environmental adaptability, and energy efficiency.
✅ Outdoor Measuring Instruments and Testing Equipment: Suitable for portable measuring instruments, environmental testing equipment, and field data acquisition terminals. The FSTN transflective structure leverages ambient light to assist with visibility; combined with an anti-glare (AG) surface treatment, it improves data readability in bright outdoor environments while reducing reliance on the backlight—offering a low-power display solution for battery-operated testing equipment.
✅ Industrial Instrumentation and Control Equipment: Ideal for industrial control instruments, equipment monitoring terminals, and automation control systems, where it can display operating parameters, equipment status, alarm information, and operation menus. An operating temperature range of −30℃ to +80℃ meets the requirements of diverse industrial environments, while the low-power design helps minimize energy consumption for equipment in continuous, long-term operation.
✅ Battery-Powered Portable Electronic Devices: Suitable for handheld inspection tools, portable control terminals, and other low-power electronic products. With a module current draw of only 50μA when the backlight is turned off, it significantly reduces energy consumption—making it an excellent choice for portable devices that require long battery life.
✅ Outdoor Monitoring and Wireless Sensor Terminals: Designed for outdoor environmental monitoring, sensor data acquisition, and wireless monitoring terminals. The graphic dot-matrix display can present equipment status, monitoring data, and alarm notifications. Its 50μA current draw (with the backlight off) and wide operating temperature range provide reliable display support for monitoring equipment deployed for long-term, low-power operation.
✅ Embedded Controllers and Smart Electronic Terminals: The I2C interface reduces the number of communication signals required between the display module and the main controller, making it well-suited for embedded control systems with limited space or constrained GPIO resources. Coupled with a low-power driver design, it offers a flexible information display solution for various types of battery-powered controllers and smart electronic devices.

Please contact us for more detailed product data: Chinese LCD Manufacturer